magazine top

By using the BornewablesTM portfolio, Greiner Packaging is for the first time incorporating renewable resources in the production of food cups made of polypropylene (PP) with in-mold labeling (IML) as the decoration technology. Initial prototypes of the cups are available now. The new premium polyolefins designed for circularity by Borealis offer a host of advantages:

  • Manufactured using second-generation feedstocks not based on fossil fuels
  • Same performance as virgin materials; drop-in solution, approved for food contact
  • ISCC PLUS certification, based on the mass balance approach
  • Carbon footprint reduced by up to 120 percent (including all steps from the sourcing of raw materials to products leaving Borealis production site)

Kremsmünster, Austria, June 2021. Greiner Packaging is pursuing various approaches to make its packaging solutions as sustainable as possible. One course of action is to use so-called circular materials – that is, renewable, non-fossil fuel feedstocks. For the first time, the packaging manufacturer has now produced a food cup made of premium polyolefins obtained exclusively from waste and residue streams. The Bornewables line of products is manufactured by Borealis, a leading supplier of polyolefins based in Vienna, Austria. 

Unlike renewable raw materials produced with agricultural crops grown for food and livestock feed, the Bornewables products are made from second-generation (i.e., renewably sourced) feedstocks derived solely from waste and residue streams: from vegetable oil production as well as oil waste and residues, from the timber industry, or from the food industry – for instance, used cooking oil. 

Same material performance, fast production changeover

The Bornewables offer the same characteristics as virgin polyolefin materials while boasting a substantially reduced carbon footprint. “The Bornewables portfolio represents a key step in our efforts to offer products decoupled from traditional feedstock, with the aim of providing a solution to the CO2 challenge. Through this product range, we are helping our customers and the value chain achieve their own sustainability targets, maintain their existing quality standards, and provide packaging solutions that are approved for food contact. We focus on the needs of our customers and the value chain as we work to drive the transition to a circular economy for plastics,” says Trevor Davis, Head of Marketing, Consumer Products at Borealis.

Carbon footprint reduced by up to 120 percent

A life cycle analysis initiated by Borealis at its Kallo site in Belgium, showed that using Bornewables substantially reduces a product’s carbon footprint by at least 2.7 kg CO2eq for every kilogram of polymer. This represents a saving of up to 120 percent in comparison to fossil-based PP from Borealis and roughly equates to charging 2,700 smartphones in a year*. Moreover, using these premium polyolefins designed for circularity reduces the depletion of fossil resources by around 69 percent. The entire Bornewables line of products has been certified as part of the ISCC PLUS (International Sustainability & Carbon Certification) system. This chain of custody certification guarantees customers that the feedstock used in the material is certified as renewable and sustainably produced and can be traced to its point of origin. Certification is based on the mass balance approach, which means that a contribution to the use of chemically recycled or renewable materials is made in every material stream. A number of Greiner Packaging’s locations are also already ISCC PLUS certified. 

A focus on design for recycling

The new prototype IML cups for dairy products are made of Bornewables monomaterial and were developed to be recycled as normal in conventional facilities – completely in line with the principle of design for recycling. The chemical structure of the PP material used in the cups is similar to that of standard plastic and can be recycled in the same loop as conventional polymers. This is a great example of how the packaging specialists at Greiner Packaging take into account sustainability from the very start. “Concepts like our new IML food cups only work when all partners along the entire value chain get involved and share the same sustainability targets – from feedstock suppliers through to brand owners. As a packaging producer, we support these efforts in the context of our own circular economy strategy and pursue new approaches alongside partners and suppliers like Borealis,” says Stephan Laske, R&D Director at Greiner Packaging.

*source: Charging for 2 hrs at 6W in EU (2018) at ~230grCO2/kWh

Technology facts:

  • Technology: Injection molding
  • Decoration: IML
  • Material: BornewablesTM – premium polyolefins designed for circularity

On this same topic, the first virtual Greiner Packaging Innovation Days 2021 will include a live talk on 9 June with the subject “Climate change: Act now – with biocircular materials.” The presentation will be given by Stephan Laske, R&D Director at Greiner Packaging, and Trevor Davis, Head of Marketing for Consumer Products at Borealis. Guests will have the opportunity to learn more about the BornewablesTM and how the use of these premium circular polyolefins in Greiner Packaging’s solutions can support efforts to overcome the challenges posed by climate change. They will also have the chance to put their questions directly to both experts. 

Event facts:

  • Greiner Packaging Innovation Days – virtual trade show experience
  • Dates: 9 and 10 June, 2021
  • Location: Virtual Packworld, digital platform can be accessed by registered guests
  • Registration at packworld-gpi.com/registration
  • Free admission
  • Further details on the Innovation Days program are available on the registration website

Follow Us